Skip to main content
Reference | Publication | Center for Electrochemical Energy Science

2013 Peer-Reviewed Publications

Solely Supported by CEES

C. J. Barile and A. A. Gewirth, “Investigating the Li-O2 Battery in an Ether-Based Electrolyte Using Differential Electrochemical Mass Spectrometry Batteries and Energy Storage,”J. Electrochem. Soc.160(4), A549–A552 (2013).

J. Bhattacharya and C. Wolverton, “Relative Stability of Normal vs. Inverse Spinel for 3d Transition Metal Oxides as Lithium Intercalation Cathodes,” Phys. Chem. Chem. Phys. 17, 6486–6498 (2013).

D. J. Comstock and J. W. Elam , “Mechanistic Study of Lithium Aluminum Oxide Atomic Layer Deposition,” J. Phys. Chem. C 117(4), 1677–1683 (2013).

T. T. Fister, J. Goldman, B. Long, R. Nuzzo, A. Gewirth, and P. Fenter, “X-ray Diffraction Microscopy of Lithiated Silicon Microstructures,” Appl. Phys. Lett. 102, 131903 (2013).

J. L. Goldman, M. W. Cason, D. J. Wetzel, H. Vieker, A. Beyer, A. Gölzhauser, A. A. Gewirth, and R. G. Nuzzo, “Directed Transport as a Route to Improved Performance in Micropore-Modified Encapsulated Multilayer Silicon Electrodes, J. Electrochem. Soc160 (10) A1746–A1752 (2013).

L. A. Huff, J. L. Rapp, L. Zhu, and A. A. Gewirth, “Identifying Lithium-Air Battery Discharge Products through 6Li Solid-State MAS and 1H-13C Solution NMR Spectroscopy,” J. Power Sources 235, 87–94 (2013)

J. A. Kaitz, C. E. Diesendruck, and J. S. Moore, “End Group Characterization of Poly(phthalaldehyde): Surprising Discovery of a Reversible, Cationic Macrocyclization Mechanism,” J. Am. Chem. Soc. 135, 12755–12761 (2013).

J. Kaitz and J. S. Moore, “Functional Phthalaldehyde Polymers by Copolymerization with Substituted Benzaldehydes,” Macromolecules 46, 608–612 (2013).

S. Kirklin, B. Meredig, and C. Wolverton, “High-Throughput Computational Screening of New Li-Ion Battery Anode Materials,” Adv. Energy Mater. 3, 252–262 (2013).

A. L. Lipson and M. C. Hersam, “Conductive Scanning Probe Characterization and Nanopatterning of Electronic and Energy Materials,” J. Phys. Chem. C117(16), 7953–7963 (2013). [Cover Story]

B. R. Long, J. L. Goldman, R. G. Nuzzo, and A. A. Gewirth, “Model Ge Microstructures as Anodes for Li-ion Batteries,” J. Solid State Electrochem. 17(12), 3015-–3020 (2013).

H. Tavassol, M. K. Y. Chan, M. Catarello, J. P. Greeley, D. G. Cahill, and A. A. Gewirth, “Surface Coverage and SEI Induced Electrochemical Surface Stress Changes during Li Deposition in Li-ion Battery Anodes,” J. Electrochem. Soc160(6), A888–A896 (2013).

M. M. Thackeray, M. K. Y. Chan, L. Trahey, S. Kirklin, and C. Wolverton, “Vision for Designing High Energy, Hybrid Li-Ion/Li-O2 Cells,” J. Phys. Chem. Lett. 4, 3607 (2013).

W. Weng, Z. Zhang, J. A. Schlueter, and K. Amine, “Synthesis and Electrochemical Property of Sulfone-functionalized Imidazolium Ionic Liquid Electrolytes,” Electrochim. Acta 92, 392–396 (2013)

W. Weng, V. G. Pol, and K. Amine, “Ultrasound Assisted Design of Sulfur/Carbon Cathodes with Partially Fluorinated Ether Electrolytes for Highly Efficient Li/S Batteries,” Adv. Mater. 25, 1608–1615 (2013)

Supported by CEES and Other Agencies

A. Abouimrane, S. A. Odom, H. Tavassol, M. V. Schulmerich, H. Wu, R. Bhargava, A. A. Gewirth, J. S. Moore, and K. Amine, “3-Hexylthiophene as a Stabilizing Additive for High Voltage Cathodes in Lithium-Ion Batteries,” J. Electrochem. Soc. 160, A268–A271 (2013).

R. S. Assary, J. Lu, P. Du, X. Luo, Z. Zhang, Y. Ren, L. A. Curtiss, and K. Amine, “The Efftect of Oxygen Crossover on the Anode of a Li-O2 Battery Using an Ether-based Solvent: Insights from Experimental and Computational Studies,” ChemSusChem 6, 51–55 (2013).

C. M. Berg and D. D. Dlott, “Vibrational Sum-Frequency Generation Spectroscopy of Interfacial Dynamics.” In Vibrational Spectroscopy of Electrically-Charged Interfaces; ed A. Wieckowski, et al.; Hoboken, N.J.: Wiley (2013), pp 85–119.

I. Bloom, L. Trahey, A. Abourimane, I. Belharouak, X. Zhang, Q. Wu, W. Lu, D. P. Abraham, M. Bettge, J. W. Elam, X. Meng, A. K. Burrell, C. Ban, R. Tenent, J. Nanda, and N. Dudney, “Effect of Interface Modifications on Voltage Fade in 0.5Li2MnO3•0.5LiNi0.375Mn0.375Co0.25O2Cathode Materials,” J. Power Sources (2013).

G. de Ruiter, M. Lahav, G. Evmenenko, P. Dutta, D. A. Cristaldi, A. Gulino, and M. van der Boom, “Composite Molecular Assemblies: Nanoscale Structural Control and Spectroelectrochemical Diversity,” J. Am. Chem. Soc. 135(44), 16533–16544 (2013).

P. Du, J. Lu, K.-C. Lau, X. Luo, J. Barenõ, X. Zhang, Y. Ren, Z. Zhang, L. A. Curtiss, Y.-K.Sun, and K. Amine, “Compatibility Lithium Salts with the Solvent of the Non-aqueous Electrolyte in Li-O2 Batteries,” Phys. Chem. Chem. Phys. 15, 5572–5581 (2013)

T. T. Fister, P. H. Fuoss, D. D. Fong, J. A. Eastman, C. Folkman, S. O. Hruszkewycz, M. Highland, H. Zhou, and P. Fenter, “Surface Diffraction on a Psi-circle Diffractometer Using the ?-axis Geometry,” J. Appl. Crystallogr. (2013).

C. M. Folkman, M. J. Highland, E. Perret, S. K. Kim, T. T. Fister, H. Zhou, P. M. Baldo, S. Seifert, J. A. Eastman, P. H. Fuoss, and D. D. Fong, “Modular Instrument Mounting System for Variable Environment in Operando X-ray Experiments,” Rev. of Scientific Instruments 84, 025111(1–7) (2013).

S. Grindy, B. Meredig, S. Kirklin, J. E. Saal, and C. Wolverton, “Approaching Chemical Accuracy with Density Functional Calculations: Diatomic Energy Corrections,” Phys. Rev. B 87, 075150(1–8) (2013).

S. Hao and C. Wolverton, “Lithium Transport in Amorphous Al2O3 and AlF3 for Discovery of Battery Coatings,” J. Phys. Chem. C. (2013)

R. Kaminker, X. de Hatten, M. Lahav, F. Lupo, A. Gulino, G. Evmenenko, P. Dutta, C. Browne, J. R. Nitschke, and M. van der Boom, “Assembly of Surface-Confined Homochiral Helicates: Chiral Discrimination of DOPA and Unidirectional Charge Transfer,” J. Am. Chem. Soc. 135(45), 17052–17059 (2013).

Y. Lei, J. Lu, Y. Qin, T. Wu, X. Zhang, P. Du, J. Lu, Y. Ren, J. T. Miller, J. W. Elam, and K. Amine, “Synthesis of Porous Carbon Supported Palladium Nanoparticle Catalysts by Atomic Layer Deposition: Application for Rechargeable Lithium-O2 Battery,” Nano Lett. (2013).

J. Lu, H.-G. Jung, K.-C. Lau, Z. Zhang, J. A. Schlueter, P. Du, R. S. Assary, J. Greeley, G. A. Ferguson, H.-H. Wang, J. Hassoun, H. Iddir, J. Zhou, L. Zuin, Y. Hu, Y.-K. Sun, B. Scrosati, L. A. Curtiss, and K. Amine, “Magnetism in Lithium-Oxygen Discharge Product,” ChemSusChem6, 1196–1202 (2013). [Back Cover Story]

J. Lu, Y. Lei, K. C. Lau, X. Luo, P. Du, J. Wen, R. S. Assary, U. Das, D. Miller, J. W. Elam, H. M. Albishri, D. Abd El-Hady, Y.-K. Sun, L. A. Curtiss, and K. Amine, “A Nanostructured Cathode Architecture for Low Charge Overpotential in Lithium-Oxygen Batteries,” Nat. Comm. 4, 2383 (2013)

G. N. Parsons, J. W. Elam, S. M. George, S. Haukka, H. Jeon, W. M. M. Kessels, M. Leskela, P. Poodt, M. Ritala, and S. M. Rossnagel, “History of Atomic Layer Deposition and its Relationship with the American Vacuum Society,”J. Vac. Sci. Technol. A 31(5) 050818-1–0508180-11 (2013)

S. J. Pety, N. R. Sottos, and S. R. White, “Actively Cooled Battery Packaging Using Vascular Composites,”Proc. 19th Intl. Conf. on Composite Materials (2013).

J. E. Saal, S. Kirklin, M. Aykol, B. Meredig, and C. Wolverton, “Materials Design and Discovery with High-Throughput Density Functional Theory: The Open Quantum Materials Database (OQMD),” JOM65, 1501 (2013). [Cover Story]

G. A. Sasenbaeva, J.-M. Nedelec, G. Daniel, C. Tiseanu, V. Parvulescu, V. G. Pol, L. ABrego, and V. G. Kessler, “Mesoporous Anatase TiO2 Nanorods as Thermally Robust Anode Materials for Li-Ion Batteries: Detailed Insight into the Formation Mechanism,” Chemistry 19(51), 17439–17444 (2013).

J. P. Townsend, Y.-Y. Chang, X. Lou, M. Merino, S. J. Kirklin, J. W. Doak, A. Issa, C. Wolverton, S. N. Tkachev, P. Dera, and S. D. Jacobsen, “Stability and equation of state of post-aragonite BaCO3,” Phys. Chem. Minerals 40, 447–453 (2013).

L. Trahey, N. K. Karan, M. K. Y. Chan, J. Lu, Y. Ren, J. Greeley, M. Balasubramanian, A. K. Burrell, L. A. Curtiss, and M. M. Thackeray, "Synthesis, Characterization, and Structural Modeling of High-Capacity, Dual Functioning MnO2 Electrode/Electrocatalysts for Li-O2 Cells,"Adv. Energy Mater. 375–84 (2013)

C. Zhan, J. Lu, A. J. Kropf, T. Wu, A. N. Jansen, Y.-Kook Sun, X. Qiu and K. Amine,Mn(II) Deposition on Anodes and its Effects on Capacity Fade in Spinel Lithium Manganate–Carbon Systems,”  Nat. Comm. 4, 2437

X. Zhang, I. Belharouak, L. Li, Y. Lei, J. W. Elam, A. Nie, X. Chen, R. S. Yassar, and R. L. Axelbaum, “Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD,” Adv. Energy Mater. 3(10), 1299–1307 (2013).