Skip to main content
Reference | Publication | Energy Systems Division

ES 2013 Publications

2013

M. M. Mintz, Mertes, C., and Stewart, E., “Economic Impact of Fuel Cell Deployment in Forklifts and for Backup Power under the American Recovery and Reinvestment Act”, Argonne National Laboratory, Argonne, IL USA, 2013.

T. S. Stephens, “Non-Cost Barriers to Consumer Adoption of New Light-Duty Vehicle Technologies”, U.S. Department of Energy, Washington, DC USA, 2013.

V. Koritarov, Guzowski, L., Feltes, J., Kazachkov, Y., Lam, B., Grande-Moran, C., Thomann, G., Eng, L., Trouille, B., and Donalek, P., “Review of Existing Hydroelectric Turbine-Governor Simulation Models”, Argonne National Laboratory, Argonne, IL USA, 2013.

L. L. Gaines, “The bottom line: Cost versus benefits”, p. 1, 2013.

B. Ma, Narayanan, M., Liu, S., Hu, Z., and Balachandran, U., “Development of PLZT Film-on-Foil Capacitors with High Energy Density”. p. 15, 2013.

S. Som, “Simulations of Compression Ignition Engines with Detailed Chemistry and Spray Models”. p. 26, 2013.

J. Harper, “Development and Implementation of SAE DC Charging Digital Communication for Plug-in Electric Vehicle DC Charging”, in 2013 SAE World Congress & Exhibition, Detroit, MI, USA, 2013, p. 1.

L. L. Gaines, “Recycling of Lithium-Ion Batteries”. p. 20, 2013.

V. Koritarov, Feltes, J., and Kazachkov, Y., “Simulation of the Secondary Frequency Control Capability of the Advanced PSH Technology and Its Application to the SMUD System”, 2013.

P. K. Senecal, Pomraning, E., Richards, K. J., and Som, S., “An Investigation of Grid Convergence for Spray Simulations Using an LES Turbulence Model”, in 2013 SAE World Congress & Exhibition, Detroit, MI, USA, 2013, p. 1.

A. J. Burnham, “Case Study: Liquefied Natural Gas”. p. 6, 2013.

S. Som, Liu, W., Zhou, D. Y., Magnotti, G. M., Sivaramakrishnan, R., Longman, D. E., Skodje, R. T., and Davis, M. J., “Quantum Tunneling Affects Engine Performance”, The Journal of Physical Chemistry Letters, vol. 4, no. 12, p. 1, 2013.

D. J. Santiniand Poyer, D. A., “Gasoline Prices, Vehicle Spending and National Employment: Vector Error Correction Estimates Implying a Structurally Adapting, Integrated System, 1949-2011”, presented at the 20130701, 2013, p. 22.

T. S. Stephens, Birky, A. K., and Ward, J., “Vehicle Technologies Program Government Performance and Results Act (GPRA) Report for Fiscal Year 2014”, Argonne National Laboratory, Argonne, IL, USA, 2013.

J. Mendes, Sumaili, J., Bessa, R. J., Keko, H., Miranda, V., Botterud, A., and Zhou, Z., “Very Short-Term Wind Power Forecasting: State-of-the-Art”, Argonne National Laboratory, Argonne, IL USA, 2013.

D. J. Santini, Stephens, T. S., Kim, N., Zhou, Y., and Gallagher, K. G., “Cost Effective Annual Use and Charging Frequency for Four Different Plug-in Powertrains: Poster”. p. 15, 2013.

J. B. Dunnand Gaines, L. L., “Energy and Environmental Impacts of Lithium Production for Automotive Batteries”. p. 23, 2013.

J. R. Gasper, Veselka, T., Mahalik, M., Hayse, J. W., Saha, S., Wigmosta, M. S., Voisin, N., Rakowski, C., Coleman, A., and Lowry, T. S., “Water Use Optimization Toolset Project: Development and Demonstration Phase Draft Report”, Argonne National Laboratory, Argonne, IL USA, 2013.

C. Lorenzo-Martin, Ajayi, O. O., Erdemir, A., Fenske, G. R., and Wei, R., “Effect of Microstructure and Thickness on the Friction and Wear Behavior of CrN Coatings”, presented at the 20130414, 2013, p. 2.

U. Balachandran, Narayanan, M., Liu, S., and Ma, B., “Development of Film-on-Foil Ceramic Dielectrics for Embedded Capacitors for Power Inverters in Electric Drive Vehicles”, Japanese Journal of Applied Physics, vol. 52, no. 5S1, p. 1, 2013.

C. Lorenzo-Martin, Ajayi, O. O., Erdemir, A., Fenske, G. R., and Wei, R., “Effect of Microstructure and Thickness on the Friction and Wear Behavior of CrN Coatings”, presented at the 20130414, 2013, p. 2.

U. Balachandran, Narayanan, M., Liu, S., and Ma, B., “Development of Film-on-Foil Ceramic Dielectrics for Embedded Capacitors for Power Inverters in Electric Drive Vehicles”, Japanese Journal of Applied Physics, vol. 52, no. 5S1, p. 1, 2013.

S. E. Plotkin, Stephens, T. S., and McManus, W., “Vehicle Technology Deployment Pathways: An Examination of Timing and Investment Constraints”, U.S. Department of Energy, Washington, DC, USA, 2013.

V. Koritarov, Guzowski, L., Feltes, J., Kazachkov, Y., Gong, B., Trouille, B., and Donalek, P., “Modeling Adjustable Speed Pumped Storage Hydro Units Employing Doubly-Fed Induction Machines”, Argonne National Laboratory, Argonne, IL USA, 2013.

T. S. Stephens, Zhou, Y., Elgowainy, A., Duoba, M., Vyas, A. D., and Rousseau, A., “Estimating On-Road Fuel Economy of PHEVs from Test and Aggregated Data”, presented at the 20130301, 2013, p. 19.

S. Som, Longman, D. E., and Bair, R., “A Numerical Investigation on Scalability and Grid Convergence of Internal Combustion Engine Simulations”, in 2013 SAE World Congress & Exhibition, Detroit, MI, USA, 2013, p. 1.

K. De La Rosa, “Project-Based Learning through DOE Advanced Vehicle Technology Competitions (AVTC)”. p. 15, 2013.

B. Ma, Narayanan, M., Liu, S., Hu, Z., and Balachandran, U., “Development of PLZT Film-on-Foil Capacitors with High Energy Density”, presented at the 20130410, 2013, p. 1.

S. Som, Longman, D. E., Garcia, M., Aithal, S., Bair, R., Quan, S., Senecal, P. K., Richards, K. J., Weber, M., and Shethaji, T., “Towards Predictive Simulations of the Internal Combustion Engine Using High-Performance Computing Tools: Poster”. p. 1, 2013.

V. Koritarov, Feltes, J., Kazachkov, Y., Gong, B., Donalek, P., and Gevorgian, V., “Testing Dynamic Simulation Models for Different Types of Advanced Pumped Storage Hydro Units”, 2013.

M. M. Mintz, Han, J., and Urgun-Demirtas, M., “Greenhouse Gas Emissions and Natural Gas Vehicles: The Case for Renewable Natural Gas”, presented at the 20130627, 2013, p. 5.

E. Rask, Santini, D. J., and Lohse-Busch, H., “Analysis of Input Power, Energy Availability, and Efficiency during Deceleration for X-EV Vehicles”, SAE Journal of Alternative Powertrains, vol. 2, no. 2, p. 1, 2013.

Z. Wang, Scarcelli, R., Som, S., and McConnell, S., “Multi-Dimensional Modeling and Validation of Combustion in a High-Efficiency Dual-Fuel Light-Duty Engine”, in 2013 SAE World Congress & Exhibition, Detroit, MI, USA, 2013, p. 1.

D. J. Santini, Rood-Werpy, M. A., Burnham, A. J., Han, J., Wallner, T., Grannis, L., and Laughlin, M. D., “Energy Security and Greenhouse Gas Emissions of Natural Gas Heavy-Duty Commercial Trucking”. p. 16, 2013.

“High-Performance Computing Enables Huge Leap Forward in Engine Development”. p. 3, 2013.

Z. Zhouand Botterud, A., “Dynamic Scheduling of Operating Reserves in Co-Optimized Electricity Markets with Wind Power”, IEEE Transactions on Power Systems, vol. 29, no. 1, p. 11, 2013.

D. J. Santiniand Burnham, A. J., “Reducing Light Duty Vehicle Fuel Consumption and Greenhouse Gas Emissions: The Combined Potential of Hybrid Technology and Behavioral Adaptation”, SAE International Journal of Alternative Powertrains, vol. 2, no. 2, p. 11, 2013.

M. Wu, “Investigating Grey Water Footprint for the Production of Gasoline and Diesel from Biomass via Fast Pyrolysis”, Argonne National Laboratory, Argonne, IL USA, 2013.

D. J. Santiniand Burnham, A. J., “Reducing Light-Duty Vehicle Fuel Consumption and Greenhouse Gas Emissions: The Combined Potential of Hybrid Technology and Behavioral Adaptation”. p. 15, 2013.

D. J. Santini, Rood-Werpy, M. A., Burnham, A. J., Han, J., Wallner, T., Grannis, L., and Laughlin, M. D., “Energy Security and Greenhouse Gas Emissions of Natural Gas Heavy-Duty Commercial Trucking”, presented at the 20130625, 2013, p. 23.

L. L. Gaines, Dunn, J. B., and James, C., “Can Automotive Battery Recycling Help Meet Critical Material Demand?”. p. 40, 2013.

V. Koritarov, Guzowski, L., Feltes, J., Kazachkov, Y., Gong, B., Trouille, B., and Donalek, P., “Modeling Adjustable Speed Pumped Storage Hydro Units Employing Doubly-Fed Induction Machines”, Argonne National Laboratory, Argonne, IL USA, 2013.

S. Tong, Ma, B., Narayanan, M., Liu, S., and Balachandran, U., “Dialectric Behavior of Lead Lanthanum Zirconate Titanate Thin Films Deposited on Different Electrodes/Substrates”, Materials Letters, vol. 106, p. 1, 2013.

L. L. Gaines, Dunn, J. B., and James, C., “Can Automotive Battery Recycling Help Meet Lithium Demand?”. p. 32, 2013.

V. Koritarov, Guzowski, L., Feltes, J., Kazachkov, Y., Gong, B., Trouille, B., Donalek, P., and Gevorgian, V., “Modeling Ternary Pumped Storage Units”, Argonne National Laboratory, Argonne, IL USA, 2013.

S. E. Plotkin, Stephens, T. S., and McManus, W., “Incorporating Timing and Investment Constraints in Vehicle Deployment Analyses”, presented at the 20130301, 2013, p. 17.

D. J. Santiniand Burnham, A. J., “Reducing Light Duty Vehicle Fuel Consumption and Greenhouse Gas Emissions: The Combined Potential of Hybrid Technology and Behavioral Adaptation”, presented at the 20130408, 2013, p. 1.

A. K. Birkyand Moore, J., “GPRA 2015 VTO Heavy Vehicles Program Benefits Analysis Methodology and Summary Results”. 2013.

“Large-scale, Ultra-fast Boriding Process Licensed to Bodycote: Poster”. p. 1, 2013.

B. Ma, Liu, S., Tong, S., Narayanan, M., Koritala, R. E., Hu, Z., and Balachandran, U., “Residual Stress of (Pb0.92La0.08)(Zr0.52Ti0.48)O3 Films Grown by a Sol-gel Process”, Smart Materials and Structures, vol. 22, no. 5, p. 1, 2013.