Skip to main content
Reference | Publication | Energy Systems Division

ES 2015 Publications

2015

D. Duke, Swantek, A., Kastengren, A., Fezzaa, K., and Powell, C. F., “Recent Developments in X-ray Diagnostics for Cavitation”, SAE International Journal of Fuels and Lubricants, vol. 8, no. 1, p. 11, 2015.

J. L. Linville, Shen, Y., Wu, M., and Urgun-Demirtas, M., “Current State of Anaerobic Digestion of Organic Wastes in North America”, Current Sustainable/Renewable Energy Reports, p. 10, 2015.

Z. Zhou, Yang, Q., Liu, M., Zhang, Z., Zhang, X., Sun, D., Nan, T., Sun, N., and Chen, X., “Antiferroelectric Materials, Applications and Recent Progress on Multiferroic Heterostructures”, Spin, vol. 5, p. 13, 2015.

J. Wang, “Advanced Distribution Management Systems for Grid Modernization -- DMS Functions”, Argonne National Laboratory, Argonne, IL USA, 2015.

P. R. Windover, Owens, R. J., Levinson, T. M., and Laughlin, M. D., “Stop and Restart Effects on Modern Vehicle Starting System Components”, Argonne National Laboratory, Argonne, IL USA, 2015.

C. Chen, Wang, J., Qiu, F., and Zhao, D., “Resilient Distribution System by Microgrids Formation After Natural Disasters”, IEEE Transactions on Smart Grid, vol. PP, no. 99, 2015.

B. Ma, Hu, Z., Koritala, R. E., Lee, T. H., Dorris, S. E., and Balachandran, U., “PLZT film capacitors for power electronics and energy storage applications”, Journal of Materials Science: Materials in Electronics, 2015.

B. Ma, Hu, Z., Koritala, R. E., Lee, T. H., Dorris, S. E., and Balachandran, U., “PLZT film capacitors for power electronics and energy storage applications”, Journal of Materials Science: Materials in Electronics, vol. 26, no. 12, p. 8, 2015.

L. Sileghem, Wallner, T., and Verhelst, S., “A quasi-dimensional model for SI engines fueled with gasoline–alcohol blends: Knock modeling”, Fuel, vol. 140, p. 10, 2015.

Y. Huangand Zhou, Y., “An Optimization Framework for Workplace Charging Strategies”, Journal of Transportation Research Part C: Emerging Technologies, vol. 52, p. 11, 2015.

W. Zhao, France, D. M., Yu, W., and Singh, D., “Subcooled Boiling Heat Transfer for Cooling of Power Electronics in Hybrid Electric Vehicles”, Journal of Electronic Packaging, vol. 137, no. 3, p. 7, 2015.

D. Berman, Erdemir, A., Zinovev, A. V., and Sumant, A. V., “Nanoscale friction properties of graphene and graphene oxide”, Diamond and Related materials, vol. 54, p. 7, 2015.

Z. Lu, Streets, D. G., Winijkul, E., Yan, F., Chen, Y., Bond, T. C., Feng, Y., Dubey, M. K., Liu, S., Pinto, J. P., and Carmichael, G. R., “Light Absorption Properties and Radiative Effects of Primary Organic Aerosol Emissions”, Environmental Science and Technology, vol. 49, no. 8, p. 10, 2015.

O. O. Ajayi, Lorenzo-Martin, C., Fenske, G. R., Corlett, J., Murphy, C., and Przesmitzki, S., “Bioderived Fuel Blend Dilution of Marine Engine Oil and Impact on Friction and Wear Behavior”, Journal of Tribology, vol. 138, no. 2, p. 11, 2015.

Q. Xue, Battistoni, M., Powell, C. F., Longman, D. E., Quan, S., Pomraning, E., Senecal, P. K., Schmidt, D. P., and Som, S., “An Eulerian CFD model and X-ray radiography for coupled nozzle flow and spray in internal combustion engines”, International Journal of Multiphase Flow, vol. 70, p. 11, 2015.

P. Rocha, Das, T. K., Nanduri, V., and Botterud, A., “Impact of CO2 cap-and-trade programs on restructured power markets with generation capacity investments”, International Journal of Electrical Power & Energy Systems, vol. 71, p. 13, 2015.

Y. J. Lin, Henry, M., and Sather, N., “Bioprocessing of Cost-Competitive Biobased Organic Acids”, in Commercializing BioBased Products, 2015.

X. Zhang, Flueck, A. J., and Abhyankar, S., “Implicitly-Coupled Electromechanical and Electromagnetic Transient Analysis using a Frequency Dependent Network Equivalent”, IEEE Transactions on Power Delivery, vol. PP, no. 99, 2015.

Q. Xue, Battistoni, M., Powell, C. F., Longman, D. E., Quan, S., Pomraning, E., Senecal, P. K., Schmidt, D. P., and Som, S., “An Eulerian CFD Model and X-ray Radiography for Coupled Nozzle Flow and Spray in Internal Combustion Engines”, International Journal of Multi-phase Flows , vol. 70, p. 11, 2015.

H. Cai, Brandt, A. R., Yeh, S., Englander, J. G., Han, J., Elgowainy, A., and M.Q., W., “Well-to-Wheels Greenhouse Gas Emissions of Canadian Oil Sands Products: Implications for U.S. Petroleum Fuels”, Environmental Science & Technology, vol. 49, no. 13, p. 8, 2015.

M. Modaresand Bergerson, J., “Buckling Analysis of Uncertain Structures Using Imprecise Probability”, in SAE 2015 World Congress & Exhibition, 2015.

J. Wang, Lu, X., and Chen, C., “Guidelines for Implementing Advanced Distribution Management Systems”, Argonne National Laboratory, Argonne, IL USA, 2015.

L. L. Gaines, “How Can We Enable EV Battery Recycling?”. 2015.

L. L. Gainesand Sloop, S., “How Can We Enable EV Battery Recycling?”. 2015.

C. Liu, Lee, C., Chen, H., and Merhotra, S., “Stochastic Robust Mathematical Programming Model for Power System Optimization”, IEEE Transactions on Power Systems, vol. PP, no. 99, 2015.

T. Levinand Botterud, A., “Capacity Adequacy and Revenue Sufficiency in Electricity Markets with Wind Power”, IEEE Transactions on Power Systems, vol. 30, no. 3, p. 9, 2015.

A. A. Al-Azizi, Eryilmaz, O., Erdemir, A., and Kim, S. H., “Surface Structure of Hydrogenated Diamond-like Carbon: Origin of Run-In Behavior Prior to Superlubricious Interfacial Shear”, Langmuir, vol. 31, no. 5, p. 11, 2015.

D. Duke, Swantek, A., Kastengren, A., Fezzaa, K., and Powell, C. F., “Recent Developments in X-ray Diagnostics for Cavitation”, SAE International Journal of Fuels and Lubricants, vol. 8, no. 1, p. 11, 2015.

J. L. Linville, Shen, Y., Wu, M., and Urgun-Demirtas, M., “Current State of Anaerobic Digestion of Organic Wastes in North America”, Current Sustainable/Renewable Energy Reports, p. 10, 2015.

Z. Zhou, Yang, Q., Liu, M., Zhang, Z., Zhang, X., Sun, D., Nan, T., Sun, N., and Chen, X., “Antiferroelectric Materials, Applications and Recent Progress on Multiferroic Heterostructures”, Spin, vol. 5, p. 13, 2015.

J. Wang, “Advanced Distribution Management Systems for Grid Modernization -- DMS Functions”, Argonne National Laboratory, Argonne, IL USA, 2015.

P. R. Windover, Owens, R. J., Levinson, T. M., and Laughlin, M. D., “Stop and Restart Effects on Modern Vehicle Starting System Components”, Argonne National Laboratory, Argonne, IL USA, 2015.

C. Chen, Wang, J., Qiu, F., and Zhao, D., “Resilient Distribution System by Microgrids Formation After Natural Disasters”, IEEE Transactions on Smart Grid, vol. PP, no. 99, 2015.

B. Ma, Hu, Z., Koritala, R. E., Lee, T. H., Dorris, S. E., and Balachandran, U., “PLZT film capacitors for power electronics and energy storage applications”, Journal of Materials Science: Materials in Electronics, 2015.

B. Ma, Hu, Z., Koritala, R. E., Lee, T. H., Dorris, S. E., and Balachandran, U., “PLZT film capacitors for power electronics and energy storage applications”, Journal of Materials Science: Materials in Electronics, vol. 26, no. 12, p. 8, 2015.

L. Sileghem, Wallner, T., and Verhelst, S., “A quasi-dimensional model for SI engines fueled with gasoline–alcohol blends: Knock modeling”, Fuel, vol. 140, p. 10, 2015.

Y. Huangand Zhou, Y., “An Optimization Framework for Workplace Charging Strategies”, Journal of Transportation Research Part C: Emerging Technologies, vol. 52, p. 11, 2015.

W. Zhao, France, D. M., Yu, W., and Singh, D., “Subcooled Boiling Heat Transfer for Cooling of Power Electronics in Hybrid Electric Vehicles”, Journal of Electronic Packaging, vol. 137, no. 3, p. 7, 2015.

D. Berman, Erdemir, A., Zinovev, A. V., and Sumant, A. V., “Nanoscale friction properties of graphene and graphene oxide”, Diamond and Related materials, vol. 54, p. 7, 2015.

Z. Lu, Streets, D. G., Winijkul, E., Yan, F., Chen, Y., Bond, T. C., Feng, Y., Dubey, M. K., Liu, S., Pinto, J. P., and Carmichael, G. R., “Light Absorption Properties and Radiative Effects of Primary Organic Aerosol Emissions”, Environmental Science and Technology, vol. 49, no. 8, p. 10, 2015.

H. Huo, Cai, H., Zhang, Q., Liu, F., and He, K., “Life-cycle assessment of greenhouse gas and air emissions of electric vehicles: A comparison between China and the U.S.”, Atmospheric Environment, vol. 108, p. 10, 2015.

Y. Pei, Davis, M. J., Pickett, L. M., and Som, S., “Engine Combustion Network (ECN): Global sensitivity analysis of Spray A for different combustion vessels”, Combustion and Flame, vol. 162, no. 6, p. 10, 2015.

Y. Shen, Linville, J. L., Urgun-Demirtas, M., Schoene, R. P., and Snyder, S., “Producing pipeline-quality biomethane via anaerobic digestion of sludge amended with corn stover biochar with in-situ CO2 removal”, Applied Energy, vol. 158, p. 9, 2015.

M. Modaresand Bergerson, J., “Dynamic analysis of uncertain structures using imprecise probability”, International Journal of Reliability and Safety, vol. 9, no. 2-3, p. 17, 2015.

M. Riddle, Macal, C. M., Conzelmann, G., Combs, T. E., Bauer, D., and Fields, F., “Global critical materials markets: An agent-based modeling approach”, Resources Policy, vol. 45, p. 14, 2015.

S. E. Plotkin, “Will We Drive Less? A White Paper on U.S. Light Duty Travel”, Argonne National Laboratory, Argonne, IL USA, 2015.

J. Kodavasal, Harms, K., Srivasta, P., Som, S., Quan, S., Richards, K. J., and Garcia, M., “Development of a Stiffness-Based Chemistry Load Balancing Scheme, and Optimization of I/O and Communication, to Enable Massively Parallel High-Fidelity Internal Combustion Engine Simulations”, in ASME 2015 Internal Combustion Engine Division Fall Technical Conference, Houston, TX, USA, 2015.

B. Ma, Liu, S., Hu, Z., Narayanan, M., and Balachandran, U., “Effect of manganese oxide insertion layer on the dielectric and ferroelectric properties of Pb0.92La0.08Zr0.52Ti0.48O3 films grown by a sol–gel process”, Materials Research Bulletin, vol. 67, p. 5, 2015.

J. Wu, Botterud, A., Mills, A., Zhou, Z., Hodge, B. - M., and Heaney, M., “Integrating solar PV (photovoltaics) in utility system operations: Analytical framework and Arizona case study”, Energy, vol. 85, p. 10, 2015.

A. Swantek, Kastengren, A., Duke, D., Tilocco, Z., Sovis, N., and Powell, C. F., “Quantification of Shot-to-Shot Variation in Single Hole Diesel Injectors”, SAE International Journal of Fuels and Lubricants, vol. 8, no. 1, p. 7, 2015.

Y. Zhou, M.Q., W., Johnson, L., Wang, H., and Hao, H., “Plug-in electric vehicle market penetration and incentives: a global review”, in Mitigation and Adaptation Strategies for Global Change, vol. 20, Springer, 2015.

J. Qi, Sun, K., and S., M., “An interaction model for simulation and mitigation of cascading failures”, IEEE Transactions on Power Systems, vol. 30, no. 2, p. 15, 2015.

J. Luand Elam, J. W., “Low Temperature ABC-Type Ru Atomic Layer Deposition through Consecutive Dissociative Chemisorption, Combustion, and Reduction Steps”, Chemistry of Materials, vol. 27, no. 14, p. 7, 2015.

J. Wang, “Advanced Distribution Management Systems for Grid Modernization -- Importance of DMS Distribution Grid Modernization”, Argonne National Laboratory, Argonne, IL USA, 2015.

J. B. Dunn, James, C., Gaines, L. L., Gallagher, K., Dai, Q., and Kelly, J. C., “Material and Energy Flows in the Production of Cathode and Anode Materials for Lithium Ion Batteries”, Argonne National Laboratory, Argonne, IL USA, 2015.

L. L. Gaines, “Enabling the Future of Li-Ion Batteries”. 2015.

C. Lee, Liu, C., Mehrotra, S., and Bie, Z., “Robust Distribution Network Reconfiguration”, IEEE Transactions on the Smart grid, vol. 6, no. 2, p. 7, 2015.

V. V. Dmitriev, Crowley, D. E., Zvonarev, A. N., Rusakova, T. G., Negri, M. C., and Kolesnikova, S. A., “Modifications of the cell wall of yeasts grown on hexadecane and under starvation conditions”, Yeast, 2015.

B. J. O'Neill, Jackson, D. H. K., Lee, J., Canlas, C. P., Stair, P. C., Marshall, C. L., Elam, J. W., Kuech, T. F., Dumesic, J. A., and Huber, G. W., “Catalyst Design with Atomic Layer Deposition”, ACS Catalysis, vol. 5, no. 3, p. 22, 2015.

Z. Qin, Dunn, J. B., Kwon, H., Mueller, S., and Wander, M. M., “Soil carbon sequestration and land use change associated with biofuel production: empirical evidence”, Global Change Biology Bioenergy, 2015.

P. Wang, Barajas-Solano, D. A., Constantinescu, E. M., Abhyankar, S., Ghosh, D., Smith, B. F., Huang, Z., and Tartakovsky, A. M., “Probabilistic Density Function Method for Stochastic ODEs of Power Systems with Uncertain Power Input ”, SIAM/ASA Journal on Uncertainty Quantification, vol. 3, no. 1, p. 24, 2015.

Y. Pei, Mehl, M., Liu, W., Lu, T., Pitz, W. J., and Som, S., “A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications”, Journal of Engineering for Gas Turbines and Power, vol. 137, no. 11, p. 9, 2015.

A. Lee, Elam, J. W., and Darling, S. B., “Membrane materials for water purification: design, development, and application”, Environmental Science: Water Research & Technology, 2015.

A. Erdemir, “Low-friction Materials and Coatings”, in Multifunctional Materials for Tribological Applications, 2015.

Y. Pei, Som, S., Pomraning, E., Senecal, P. K., Skeen, S., Manin, J., and Pickett, L. M., “Large eddy simulation of a reacting spray flame with multiple realizations under compression ignition engine conditions”, Combustion and Flame, vol. 162, no. 12, p. 14, 2015.

S. M. Aithaland Wild, S. M., “ACCOLADES: A Scalable Workflow Framework for Large-Scale Simulation and Analyses of Automotive Engines”, High Performance Computing, vol. 9137. Springer, Frankfurt, Germany, pp. 87-95, 2015.

J. B. Dunn, Gaines, L. L., Kelly, J. C., James, C., and Gallagher, K. G., “The significance of Li-ion batteries in electric vehicle life-cycle energy and emissions and recycling's role in its reduction”, Energy & Environmental Science, vol. 8, no. 1, p. 10, 2015.

V. Sharma, Erdemir, A., and Aswath, P. B., “An analytical study of tribofilms generated by the interaction of ashless antiwear additives with ZDDP using XANES and nano-indentation”, Tribology International, vol. 82, no. Part A, p. 15, 2015.

Y. Hamada, Ssegane, H., and Negri, M. C., “Mapping Intra-Field Yield Variation Using High Resolution Satellite Imagery to Integrate Bioenergy and Environmental Stewardship in an Agricultural Watershed”, Remote Sensing, vol. 7, no. 8, p. 16, 2015.

J. Qiand Pfenninger, S., “Controlling the self-organizing dynamics in a sandpile model on complex networks by failure tolerance”, Europhysics Letters, vol. 111, no. 3, 2015.

D. Singh, Zhao, W., Yu, W., France, D. M., and Kim, T., “Analysis of a graphite foam–NaCl latent heat storage system for supercritical CO2 power cycles for concentrated solar power”, Solar Energy, vol. 118, p. 10, 2015.

C. Chen, Wang, J., Li, Z., Sun, H., and Wang, Z., “PMU Uncertainty Quantification in Voltage Stability Analysis”, IEEE Transactions on Power Systems, vol. 30, no. 4, p. 2, 2015.