Skip to main content
Reference | Publication | Energy Systems Division

ES 2016 Publications

2016

J. L. Linville, Shen, Y., Urgun-Demirtas, M., and Snyder, S., “Effect of particle size and doses of olivine addition on carbon dioxide sequestration during anaerobic digestion of sewage sludge at ambient and mesophilic temperatures”, Biochemistry, vol. 51, no. 1, p. 13, 2016.

Y. Lei, Lee, S., Low, K. - B., Marshall, C. L., and Elam, J. W., “Combining Electronic and Geometric Effects of ZnO-Promoted Pt Nanocatalysts for Aqueous Phase Reforming of 1-Propanol”, ACS Catalysis, vol. 6, p. 4, 2016.

Z. Zhou, Levin, T., and Conzelmann, G., “Survey of U.S. Ancillary Services Markets”, Argonne National Laboratory, Argonne, IL USA, 2016.

Y. Zhou, Santini, D. J., Stephens, T. S., and Ward, J., “Comparison of Value Retention of Plug-in Vehicles and Conventional Vehicles and Potential Contributing Factors”, in 2016 Electric Vehicle Symposium & Exhibition , Montreal, Canada, 2016.

Z. Qin, Dunn, J. B., Kwon, H., Mueller, S., and Wander, M. M., “Influence of spatially dependent, modeled soil carbon emission factors on life-cycle greenhouse gas emissions of corn and cellulosic ethanol”, GCB Bioenergy, vol. 8, no. 6, p. 14, 2016.

S. Wang, Xie, H., Lin, Y., Poeppelmeier, K. R., Li, T., Winans, R. E., Cui, Y., Ribeiro, F., Canlas, C. P., Elam, J. W., Zhang, H., and Marshall, C. L., “High Thermal Stability of La2O3- and CeO2-Stabilized Tetragonal ZrO2”, Inorganic Chemistry, vol. 55, no. 5, p. 8, 2016.

J. Sevik, Pamminger, M., Wallner, T., Scarcelli, R., Reese, R., Iqbal, A., Boyer, B., Wooldridge, S., Hall, C., and Miers, S., “Performance, Efficiency and Emissions Assessment of Natural Gas Direct Injection compared to Gasoline and Natural Gas Port-Fuel Injection in an Automotive Engine ”, SAE International Journal of Engines, vol. 9, no. 2, p. 13, 2016.

F. K. Adom, Cai, H., Dunn, J. B., Hartley, D., Searcy, E., Tan, E., Jones, S., and Snowden-Swan, L., “Supply Chain Sustainability Analysis of Fast Pyrolysis and Hydrotreating Bio-Oil to Produce Hydrocarbon Fuels”, Argonne National Laboratory, Argonne, IL USA, 2016.

J. Qi, Wang, J., Liu, H., and Dimitrovski, A., “Nonlinear Model Reduction in Power Systems by Balancing of Empirical Controllability and Observability Covariances”, IEEE Transactions on Power Systems, 2016.

Y. Zhang, Liu, M., Peng, B., Zhou, Z., Chen, X., Yang, S. - M., Jiang, Z. - D., Zhang, J., Ren, W., and Ye, Z. - G., “Controlled Phase and Tunable Magnetism in Ordered Iron Oxide Nanotube Arrays Prepared by Atomic Layer Deposition”, Scientific Reports, vol. 6, 2016.

Z. Zhou, Grocke, G., Yanguas-Gil, A., Wang, X., Gao, Y., Sun, N., Howe, B., and Chen, X., “CoFe2/Al2O3/PMNPT multiferroic heterostructures by atomic layer deposition”, Applied Physics Letters, vol. 108, no. 18, 2016.

B. N. Duncan, Lamsal, L. N., Thompson, A. M., Yoshida, Y., Lu, Z., Streets, D. G., Hurwitz, M. M., and Pickering, K. E., “A Space-based, High-resolution View of Notable Changes in Urban NOx Pollution around the World (2005–2014)”, Journal of Geophysical Research Atmospheres, vol. 121, no. 2, p. 21, 2016.

L. L. Gainesand Burnham, A. J., “Emissions from Idling Heavy-Duty Trucks and Idling-Reduction Equipment”, in Transportation Research Board Annual Meeting, Washington, D.C., 2016.

Y. Zhan, Zheng, Q. P., Wang, J., and Pinson, P., “Generation Expansion Planning with Large Amounts of Wind Power via Decision-Dependent Stochastic Programming”, IEEE Transactions on Power Systems, 2016.

Z. Hu, Ma, B., Li, M., Koritala, R. E., and Balachandran, U., “Ferroelectric PLZT thick films grown by poly(1-vinylpyrrolidone-co-vinyl acetate) (PVP/VA)-modified sol–gel process”, Materials Research Bulletin, vol. 75, p. 5, 2016.

J. P. Viera, Payri, R., Swantek, A., Duke, D., Sovis, N., Kastengren, A., and Powell, C. F., “Linking instantaneous rate of injection to X-ray needle lift measurements for a direct-acting piezoelectric injector”, Energy Conversion and Management, vol. 112, p. 9, 2016.

K. Chelliah, Raman, G. G., and Muehleisen, R., “Enhanced nearfield acoustic holography for larger distances of reconstructions using fixed parameter Tikhonov regularization”, Journal of the Acoustical Society of America, vol. 140, no. 114, 2016.

“Idling Reduction for Long-Haul Trucks: An Economic Comparison of On-Board and Wayside Technologies”, Argonne National Laboratory, Argonne, IL USA, 2016.

“Case Study - Idle Reduction Technologies for Emergency Service Vehicles”, Argonne National Laboratory, Argonne, IL USA, 2016.

R. Stoddardand Chen, X., “Electrospinning of ultra-thin nanofibers achieved through comprehensive statistical study”, Materials Research Express, vol. 3, no. 5, p. 055022, 2016.

J. Qi, Wang, J., Liu, H., and Dimitrovski, A., “Nonlinear Model Reduction in Power Systems by Balancing of Empirical Controllability and Observability Covariances”, IEEE Transactions on Power Systems, 2016.

Y. Zhang, Liu, M., Peng, B., Zhou, Z., Chen, X., Yang, S. - M., Jiang, Z. - D., Zhang, J., Ren, W., and Ye, Z. - G., “Controlled Phase and Tunable Magnetism in Ordered Iron Oxide Nanotube Arrays Prepared by Atomic Layer Deposition”, Scientific Reports, vol. 6, 2016.

Z. Zhou, Grocke, G., Yanguas-Gil, A., Wang, X., Gao, Y., Sun, N., Howe, B., and Chen, X., “CoFe2/Al2O3/PMNPT multiferroic heterostructures by atomic layer deposition”, Applied Physics Letters, vol. 108, no. 18, 2016.

B. N. Duncan, Lamsal, L. N., Thompson, A. M., Yoshida, Y., Lu, Z., Streets, D. G., Hurwitz, M. M., and Pickering, K. E., “A Space-based, High-resolution View of Notable Changes in Urban NOx Pollution around the World (2005–2014)”, Journal of Geophysical Research Atmospheres, vol. 121, no. 2, p. 21, 2016.

L. L. Gainesand Burnham, A. J., “Emissions from Idling Heavy-Duty Trucks and Idling-Reduction Equipment”, in Transportation Research Board Annual Meeting, Washington, D.C., 2016.

Y. Zhan, Zheng, Q. P., Wang, J., and Pinson, P., “Generation Expansion Planning with Large Amounts of Wind Power via Decision-Dependent Stochastic Programming”, IEEE Transactions on Power Systems, 2016.

Z. Hu, Ma, B., Li, M., Koritala, R. E., and Balachandran, U., “Ferroelectric PLZT thick films grown by poly(1-vinylpyrrolidone-co-vinyl acetate) (PVP/VA)-modified sol–gel process”, Materials Research Bulletin, vol. 75, p. 5, 2016.

J. P. Viera, Payri, R., Swantek, A., Duke, D., Sovis, N., Kastengren, A., and Powell, C. F., “Linking instantaneous rate of injection to X-ray needle lift measurements for a direct-acting piezoelectric injector”, Energy Conversion and Management, vol. 112, p. 9, 2016.

K. Chelliah, Raman, G. G., and Muehleisen, R., “Enhanced nearfield acoustic holography for larger distances of reconstructions using fixed parameter Tikhonov regularization”, Journal of the Acoustical Society of America, vol. 140, no. 114, 2016.

“Idling Reduction for Long-Haul Trucks: An Economic Comparison of On-Board and Wayside Technologies”, Argonne National Laboratory, Argonne, IL USA, 2016.

“Case Study - Idle Reduction Technologies for Emergency Service Vehicles”, Argonne National Laboratory, Argonne, IL USA, 2016.

R. Stoddardand Chen, X., “Electrospinning of ultra-thin nanofibers achieved through comprehensive statistical study”, Materials Research Express, vol. 3, no. 5, p. 055022, 2016.

R. Vijayagopal, Gallagher, K., Lee, D., and Rousseau, A., “Comparing the Powertrain Energy Densities of Electric and Gasoline Vehicles”, in SAE 2016 World Congress and Exhibition, 2016.

A. Erdemir, Ramirez, G., Eryilmaz, O., Narayanan, B., Liao, Y., Kamath, G., and Sankaranarayanan, S. K. R. S., “Carbon-based tribofilms from lubricating oils”, Nature, vol. 536, p. 5, 2016.

Y. Cao, Meng, X., and Elam, J. W., “Atomic Layer Deposition of LixAlyS Solid-State Electrolytes for Stabilizing Lithium-Metal Anodes”, ChemElectroChem Communications, vol. 3, p. 8, 2016.

A. Elgowainy, Han, J., Ward, J., Joseck, F., Gohlke, D., Lindauer, A., Ramsden, T., Biddy, M., Alexander, M., Barnhart, S., Sutherland, I., Verduzco, L., and Wallington, T. J., “Cradle-to-Grave Lifecycle Analysis of U.S. Light-Duty Vehicle-Fuel Pathways: A Greenhouse Gas Emissions and Economic Assessment of Current (2015) and Future (2025-2030) Technologies”, Argonne National Laboratory, Argonne, IL USA, 2016.

E. Ela, Milligan, M., Bloom, A., Botterud, A., Townsend,, Levin, T., and Frew, B. A., “Wholesale electricity market design with increasing levels of renewable generation: Incentivizing flexibility in system operations”, The Electricity Journal, vol. 29, no. 4, p. 10, 2016.

M. Ameen, Kundu, P., and Som, S., “Novel Tabulated Combustion Model Approach for Lifted Spray Flames with Large Eddy Simulations”, SAE International Journal of Engines, vol. 9, no. 4, 2016.

J. Wang, Lu, X., Reilly, J. T., and Martino, S., “Advanced Distribution Management Systems for Grid Modernization -- High-Level Use Cases for DMS”, Argonne National Laboratory, Argonne, IL USA, 2016.

A. Moawad, Kim, N., Shidore, N., and Rousseau, A., “Assessment of Vehicle Sizing, Energy Consumption and Cost through Large Scale Simulation of Advanced Vehicle Technologies”, Argonne National Laboratory, Argonne, IL USA, 2016.

H. Cai, Wang, J., Wang, M. Q., Qin, Z., and Dunn, J. B., “Consideration of land use change-induced surface albedo effects in life-cycle analysis of biofuels ”, Energy and Environmental Science, 2016.

J. Wang, Lu, X., Reilly, J. T., and Martino, S., “Advanced Distribution Management Systems for Grid Modernization -- High-Level Use Cases for DMS”, Argonne National Laboratory, Argonne, IL USA, 2016.

J. L. Linville, Shen, Y., Schoene, R. P., Nguyen, M., Urgun-Demirtas, M., and Snyder, S., “Impact of trace element additives on anaerobic digestion of sewage sludge with in-situ carbon dioxide sequestration”, Process Biochemistry, 2016.

D. J. Santini, Rood, M., Zhou, Y., Stephens, T. S., Miller, J., and Bluestein, L., “Implications of Successes and Failures of BEV-Focused Incentive Support for PEVs in the U.S., Canada and Europe”, in 016 Electric Vehicle Symposium & Exhibition, Montreal, Canada, 2016.

S. Abhyankar, Constantinescu, E. M., Smith, B., Flueck, A. J., and Maldonado, D., “Parallel Dynamics Simulation using Krylov-Schwarz Linear Solution Scheme”, IEEE Transactions on Smart Grid, 2016.

Z. Hu, Ma, B., Li, M., Koritala, R. E., and Balachandran, U., “Ferroelectric PLZT thick films grown by poly(1-vinylpyrrolidone-co-vinyl acetate) (PVP/VA)-modified sol–gel process”, Materials Research Bulletin, vol. 75, p. 5, 2016.

T. Dragicevic, Lu, X., and Vasquez, J. C., “DC Microgrids—Part II: A Review of Power Architectures, Applications, and Standardization Issue”, IEEE Transaction on Power Electronics, vol. 31, no. 5, p. 22, 2016.

R. Vijayagopal, Gallagher, K., Lee, D., and Rousseau, A., “Comparing the Powertrain Energy Densities of Electric and Gasoline Vehicles”, in SAE 2016 World Congress and Exhibition, Detroit, MI, USA, 2016.

Y. Shen, Linville, J. L., de Leon, P. A. A. Ignacio-, Schoene, R. P., and Urgun-Demirtas, M., “Towards a sustainable paradigm of waste-to-energy process: Enhanced anaerobic digestion of sludge with woody biochar”, Journal of Cleaner Production, 2016.

J. Qi, Sun, K., Wang, J., and Liu, H., “Dynamic State Estimation for Multi-Machine Power System by Unscented Kalman Filter with Enhanced Numerical Stability”, IEEE Transactions on Smart Grid, 2016.

T. Dragicevic, Lu, X., Vasquez, J. C., and Guerrero, J. M., “DC Microgrids—Part I: A Review of Control Strategies and Stabilization Techniques”, IEEE Transaction on Power Electronics, vol. 31, no. 7, p. 16, 2016.

A. U. Mane, Allen, A. J., Kanjolia, R. K., and Elam, J. W., “Indium Oxide Thin Films by Atomic Layer Deposition Using Trimethylindium and Ozone”, Journal of Physical Chemistry C, vol. 120, no. 18, p. 10, 2016.

D. Singh, Ganga, R., Gaviria, J., and Yusufoglu, Y., “Chemically Bonded Phosphate Ceramics: Stabilization of Secondary Wastes Streams”, in Engineered Ceramics: Current Status and Future Prospects, Hoboken, NJ: J. Wiley & Sons , 2016.

Y. Zhou, Santini, D. J., Bluestein, L., Mitchell, G., and Ward, J., “An Assessment of Causes of PEV Success across U.S. Metro Areas”, in 2016 Electric Vehicle Symposium & Exhibition, Montreal, Canada, 2016.

N. C. Wardrip, Dsouza, M., Urgun-Demirtas, M., Snyder, S., Gilbert, J. A., and Arnusch, C. J., “Printing-Assisted Surface Modifications of Patterned Ultrafiltration Membranes”, Applied Materials & Interfaces, vol. 8, no. 44, p. 10, 2016.

L. L. Gainesand Burnham, A. J., “Emissions from Idling Heavy-Duty Trucks and Idling-Reduction Equipment”, in Transportation Research Board Annual Meeting, Washington, DC USA, 2016.

R. Hanson, Ickes, A., and Wallner, T., “Use of Adaptive Injection Strategies to Increase the Full Load Limit of RCCI Operation ”, Journal of Engineering for Gas Turbines and Power, vol. 138, no. 10, p. 10, 2016.

Z. Hu, Ma, B., Li, M., Koritala, R. E., and Balachandran, U., “Ferroelectric PLZT thick films grown by poly(1-vinylpyrrolidone-co-vinyl acetate) (PVP/VA)-modified sol–gel process”, Materials Research Bulletin, vol. 75, p. 5, 2016.

J. Qi, Huang, W., and Sun, K., “Optimal Placement of Dynamic Var Sources by Using Empirical Controllability Covariance”, IEEE Transactions on Power Systems, 2016.

M. Milligan, Frew, B. A., Bloom, A., Ela, E., Botterud, A., Townsend, A., and Levin, T., “Wholesale electricity market design with increasing levels of renewable generation: Revenue sufficiency and long-term reliability”, The Electricity Journal, vol. 29, no. 2, p. 13, 2016.

J. Wang, Lu, X., Reilly, J. T., and Martino, S., “Advanced Distribution Management Systems for Grid Modernization -- High-Level Use Cases for DMS”, Argonne National Laboratory, Argonne, IL USA, 2016.

A. Moawad, Kim, N., Shidore, N., and Rousseau, A., “Assessment of Vehicle Sizing, Energy Consumption and Cost through Large Scale Simulation of Advanced Vehicle Technologies”, Argonne National Laboratory, Argonne, IL USA, 2016.

C. E. Canter, Dunn, J. B., Han, J., Wang, Z., and M.Q., W., “Policy Implications of Allocation Methods in the Life Cycle Analysis of Integrated Corn and Corn Stover Ethanol Production”, BioEnergy Research, vol. 9, no. 1, p. 11, 2016.

H. Cai, Wang, J., Wang, M. Q., Qin, Z., and Dunn, J. B., “Consideration of land use change-induced surface albedo effects in life-cycle analysis of biofuels ”, Energy and Environmental Science, 2016.

Z. Hu, Ma, B., Li, M., Koritala, R. E., and Balachandran, U., “Ferroelectric PLZT thick films grown by poly(1-vinylpyrrolidone-co-vinyl acetate) (PVP/VA)-modified sol–gel process”, Materials Research Bulletin, vol. 75, p. 5, 2016.

T. Dragicevic, Lu, X., and Vasquez, J. C., “DC Microgrids—Part II: A Review of Power Architectures, Applications, and Standardization Issue”, IEEE Transaction on Power Electronics, vol. 31, no. 5, p. 22, 2016.

J. L. Linville, Shen, Y., Schoene, R. P., Nguyen, M., Urgun-Demirtas, M., and Snyder, S., “Impact of trace element additives on anaerobic digestion of sewage sludge with in-situ carbon dioxide sequestration”, Process Biochemistry, 2016.

D. J. Santini, Rood, M., Zhou, Y., Stephens, T. S., Miller, J., and Bluestein, L., “Implications of Successes and Failures of BEV-Focused Incentive Support for PEVs in the U.S., Canada and Europe”, in 016 Electric Vehicle Symposium & Exhibition, Montreal, Canada, 2016.

S. Abhyankar, Constantinescu, E. M., Smith, B., Flueck, A. J., and Maldonado, D., “Parallel Dynamics Simulation using Krylov-Schwarz Linear Solution Scheme”, IEEE Transactions on Smart Grid, 2016.