Skip to main content

Service Agreements and Licenses

Below is a comprehensive list of articles, events, projects, references and research related content that is specific to the term described above. Use the filter to narrow the results further. To explore additional science and technology topics that Argonne researchers and engineers may be working on please visit our Research Index.

Filter Results

  • Argonne has developed a suite of five advanced computational tools for addressing complex challenges related to combustion analysis and engine design
    Intellectual Property Available to License

    ChemNODE: A Chemical Kinetics Solver Framework Based on Neural Ordinary Differential Equations (ANL-SF-20-154)

    Accurate and fast chemical kinetic models are key to the development of cleaner and more efficient combustion engines with reduced emissions and enhanced efficiency. Argonne’s software technology, ChemNODE, is a data-driven framework for learning reduced, yet accurate, chemical kinetic representations from high-fidelity data. ChemNODE works by replacing the chemical source terms derived from the law of mass action with artificial neural networks trained to correctly calculate the source terms. As opposed to conventional approaches that minimize the errors in the predicted source terms, ChemNODE uses neural ordinary differential equations (NODEs), combining the power of machine learning and numerical methods, to directly minimize the loss based on the chemical species’ profiles. ChemNODE employs forward-mode automatic differentiation and the Levenberg-Marquardt algorithm to adjust the neural network parameters, such that the discrepancies between the actual and predicted species mass fractions at different points in time are minimized.

    As a proof-of-concept, the accuracy and efficiency of ChemNODE was demonstrated for hydrogen-air combustion in a homogenous reactor at various initial temperatures and equivalence ratios. For more information on ChemNODE: ChemNODE: A Neural Ordinary Differential Equations Approach for Chemical Kinetics Solvers

    Technical Contacts:
    Ope Owoyele, Postdoctoral Researcher, Transportation and Power Systems Division
    (oowoyele@​anl.​gov; 630-252-2132)

    Pinaki Pal, Research Scientist, Transportation and Power Systems Division
    (pal@​anl.​gov; 630-252-1361)

    CIERA: Cavitation-Induced Erosion Risk Assessment Model (ANL-SF-19-118)

    Argonne has developed an approach for modeling cavitation-induced erosion for use with any multiphase computational fluid dynamics (CFD) code (e.g. CONVERGE, ANSYS Fluent, etc.). Argonne’s CIERA model provides a framework for linking multiphase flow predictions with the response of the solid material. This link is represented via an energy balance at the fluid-solid interface, which considers the cumulative energy absorbed by the solid material from repeated hydrodynamic impacts. In contrast to existing methods, Argonne’s CIERA model provides more reliable prediction of erosion severity by considering both impact load and duration.

    Application of CIERA to simulations of multiphase flow systems can guide design studies in improving system durability and reducing maintenance costs. To date, CIERA’s erosion prediction capabilities have been demonstrated in simulations of pressurized fuel through aluminum channels and a heavy-duty fuel injector, and validated against available experimental data. For more information on the CIERA model: Evaluation of a new cavitation erosion metric based on fluid-solid energy transfer in channel flow simulations; Linking cavitation collapse energy with the erosion incubation period

    Technical Contact:
    Gina Magnotti, Research Scientist, Transportation and Power Systems Division
    (gmagnotti@​anl.​gov; 630-252-8554)

    LESI: Lagrangian-Eulerian Spark Ignition Model (ANL-SF-18-030)
    Argonne has developed an approach for spark-ignition modeling of complex engine conditions, for use within industry CFD solver packages, such as Convergent Science’s CONVERGE framework. Argonne’s LESI model allows for enhanced accuracy in spark-ignition modelling of internal combustion engines and extends current capabilities to more challenging real-world conditions.  This is an important upgrade for the automotive industry, as spark-ignition engine technologies move toward unconventional boosted and dilute operation that impact a wider range of performance factors, such as flame propagation, cycle-to-cycle variation (CCV), and spark-plug durability. Additionally, compression ignition strategies are also increasingly reliant on ignition systems to control combustion behavior. Predictive models coupled with high-performance computing (HPC) can evaluate advanced combustion concepts and accelerate the development of high-efficiency engines.

    Argonne’s LESI model leverages previous findings that have expanded the use and improved the accuracy of Eulerian-type energy deposition models. The Eulerian energy deposition is coupled at any computational time-step with a Lagrangian-type evolution of the spark channel. Typical features such as spark channel elongation, stretch, and attachment to the electrodes are properly described to deliver realistic energy deposition along the channel during the entire ignition process. This is a decisive factor to accurately describe ignition processes in a highly-dilute and highly-turbulent environment.

    Please visit the LESI Model web page for more information.

    Journal article: Development of a Hybrid Lagrangian-Eulerian Model to Describe Spark-Ignition Processes at Engine-Like Turbulent Flow Conditions

    Technical Contact:
    Riccardo Scarcelli, Research Scientist, Transportation and Power Systems
    (rscarcelli@​anl.​gov; 630-252-6940)

    ML-GA: Machine-Learning Genetic Algorithm (ANL-SF-18-098; ANL-SF-19-073)
    Argonne’s ML-GA software provides a unique capability for rapid design optimization by combining machine learning (ML) and genetic algorithm (GA) techniques. It employs ML (either one or multiple ML algorithms can be incorporated) to predict the quality (merit) of a design from the input parameters. Then, a stochastic global optimization genetic algorithm (GA) is used with the machine learning model as the objective function to optimize the input parameters based on the merit function. ML-GA is scalable to high-performance computing platforms such as supercomputers, enabling optimization to be performed in significantly short time frames (of the order of a few days).

    As a proof-of-concept, the potential of the ML-GA approach coupled with computational fluid dynamics (CFD) was demonstrated for optimization of a heavy-duty internal combustion engine operating under medium load conditions. For more information on this application of ML-GA: A Machine Learning-Genetic Algorithm (ML-GA) Approach for Rapid Optimization Using High-Performance Computing

    Technical Contact:
    Pinaki Pal, Research Scientist, Transportation and Power Systems
    (pal@​anl.​gov; 630-252-1361)

    PPM4CCV: Parallel Perturbation Model for Cycle-to-Cycle Variability (ANL-SF-17-030)
    PPM4CCV is a pre-processing approach to modelling cyclic variability in spark ignition (SI) engines that can be coupled with any major engine CFD platform (e.g., CONVERGE CFD, AVL-Fire or STAR-CD). The parallel perturbation method overcomes several challenges associated with predicting cyclic variability, resulting in up to a 10x speed-up in computation times compared to conventional approaches. By implementing PPM4CCV, engine developers can not only free up computational resources, but also accelerate the engine design process.

    Cycle-to-cycle variability (CCV) is known to be detrimental to SI engine operation resulting in partial burn and knock, and an overall reduction in the reliability of the engine. Modelling CCV in SI engines is challenging because computationally intensive high-fidelity methods are required; and CCV is experienced over long timescales requiring simulations to be performed over hundreds of consecutive cycles. The PPM4CCV approach is to perform multiple parallel simulations, each of which encompasses multiple cycles, by perturbing simulation parameters such as the initial and boundary conditions. More information: Parallel Methodology to Capture Cyclic Variability in Motored Engines  

    Technical Contact:
    Muhsin Ameen, Research Scientist, Transportation and Power Systems
    (mameen@​anl.​gov; 630-252-5784)

    Business & Licensing Contact (for all software listed above):
    Eric Tyo, Business Development Executive, Science & Technology Partnerships and Outreach
    (etyo@​anl.​gov; 630-252-4924)

    Related Open Source Software

    TF-MoE: Tabulated Flamelet – Mixture of Experts (ANL-SF-19-174)

    Argonne has developed a deep learning driven approach for modeling turbulent combustion that provides a framework for incorporating high-dimensional datasets in computational fluid dynamics (CFD) simulations in a tractable and efficient manner, with 2-5 times speed-up over traditional methods. This open source software enhances predictive modeling via machine learning. Argonne’s TF-MoE software employs a mixture of experts (MoE) approach to bifurcate high-dimensional tabulated flamelet (TF) data into simpler manifolds in a physically intuitive manner. It employs a divide-and-conquer competitive approach, where different zones in the manifold are assigned to various neural networks for inference. It consists of two classes of neural networks, namely, a gating network which is a neural network classifier, and a number of experts which are neural network regressors. The software bifurcates the manifold by having different neural networks compete for each input signal. The gating network rewards the best predictors with stronger signals during subsequent training episodes and feeds poor-performing networks with weaker signals. The gating network and experts are trained using a standard backpropagation approach.

    As a proof-of-concept, the accuracy and efficiency of TF-MoE was demonstrated in an a priori study of high-dimensional tabulation for modeling of non-premixed combustion using the flamelet approach. For more information on TF-MoE: Efficient bifurcation and parameterization of multi-dimensional combustion manifolds using deep mixture of experts: an a priori study

    TF-MoE is available through GitHub: https://​github​.com/​o​w​o​y​e​l​e​o​p​e​/​T​F​M-MoE

    Technical Contacts:
    Ope Owoyele, Postdoctoral Researcher, Transportation and Power Systems Division
    (oowoyele@​anl.​gov; 630-252-2132)
    Pinaki Pal, Research Scientist, Transportation and Power Systems Division
    (pal@​anl.​gov; 630-252-1361)

  • Licensable Software

    Argonne has created a wealth of powerful software and models with broad-ranging applications, such as simulation and modeling, computation, Internet usage, and more.
    Researchers at Argonne National Laboratory are working on optimization models that use machine learning, a form of artificial intelligence, to simulate the electric system and the severity of various problems. In a region with 1,000 electric power assets, an outage of just three assets can produce nearly a billion scenarios of potential failure. Image by urbans/Shutterstock.com.
  • A software modeling tool designed for policymakers and researchers
    Intellectual Property Available to License

    BatPaC is a software modeling tool designed for policymakers and researchers who are interested in estimating the cost of lithium-ion batteries after they have reached a mature state of development and are being manufactured in high volumes. The tool captures the interplay between the design and cost of these batteries for transportation applications.

    BatPaC comes with a library of several lithium-ion battery chemistries and default inputs for all the parameters specified in different manufacturing areas of a factory.

    Applications

    • Estimates the cost of manufacturing lithium-ion batteries
    • Examines trade-offs that result from different user requirements such as power, energy, charging time, etc.

    Features

    • Supports simulation and design with precise battery mass and dimensions, cost performance characteristics, and battery pack values from bench-scale results
    • Calculates battery pack-level quantities by adding together all the battery components that are designed to meet user-defined specifications
    • Determines the performance of a given battery chemistry/cell/pack design in batteries for four types of electric vehicle applications

    Technical Details/Requirements

    • Microsoft Excel-based application
  • Software environment and framework for automotive control system design, simulation and analysis
    Intellectual Property Available to License

    Autonomie is capable of:

    • Model-in-the-Loop (MIL), Software-in-the-Loop (SIL), Hardware-in-the-Loop (HIL) and Rapid-Control-Prototyping (RCP)
    • Integrating math-based engineering activities through all stages of development
    • Mixing and matching models of different levels of abstraction with higher fidelity models where analysis and high-detail understanding is critical

    Autonomie provides the environment and standard framework to make an entire engineering organization more efficient through the reuse and sharing of models and methods, and by leveraging modeling and control experts across different areas.

    Autonomie gives your organization the capabilities for total control and integration of your multidisciplinary engineering design processes to ensure a quality design that is executed almost flawlessly from the first hardware build.

    Learn more »

    Applications

    • Automotive engineering
    • Any simple or complex engineering application that requires the integration of many systems or subsystems

    Features

    • Provides for rapid and easy integration of models with varying levels of detail
    • User-friendly graphical interface
    • Supports customizable workflow
    • Links with commercial off-the-shelf software applications for detailed, physically-based models, including GT-Power©, AMESim©, CarSim©, AVL-DRIVE©
    • Provides configuration and database management
    • Protects proprietary models and processes

    Technical Details/Requirements

    Autonomie requires:

    • Windows XP, Vista
    • MATLAB®
    • Simulink®
    • Stateflow®
    • Microsoft .NET 2.0
    • 1GB RAM

    Licensing Information

    Argonne offers first-line technical support as well as on-site training of Autonomie for companies, research institutions and universities.

    If you are interested in licensing the Autonomie software, please the complete the Licensing Request Form. If you have questions, please contact autonomie-​licensing@​anl.​gov.

    For technical support, please contact autonomie-​help@​anl.​gov.

    Argonne provides support for U.S. Government activities at autonomie-​government-​support@​anl.​gov.